Eagle Linux Box 1000S  BLACK

New Box, Eagle Linux Box -Linux Black Color
The Eagle Box is Linux satellite TV receiver, with 1 x Smartcard-Reader.

• 1. 250 MHz IBM PowerPC Processor (350 Mips)
  2. 2 LED status
  3. Linux Operating System
  4. Full automatic service scan
  5. Supports directly bouquet-lists (indirect unlimited)
  6. Supports multiple LNB-Switching control (supports DiSEqC)
  7. 1 x Smartcard-Reader
  8. Unlimited channel lists for TV/Radio
  9. SPDI/F nterface for digital bit stream out (AC-3 / DTS)
  10. MPEG2 Hardware decoding
  11. Channel-change time < 1 second
  12. Fully adaptable OSD in many languages (skin-support)
  13. 100Mbit full duplex Ethernet Interface
  14. Supports EPG (electronic program guide)
  15. 1 x Scart-interfaces (fully controlled by software)

• Video decoder:
  Video Compression MPEG-2 and MPEG-1 compatible
  Video Standard PAL and NTSC
  Video Formats 4:3 / 16:9
  Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)
  Letterbox precolating for 4:3 TV-Device Audio decoder:
  Audiokompression MPEG-1 & MPEG-2 Layer I and II
  Audio Mode Dual (main/sub), Stereo
  Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
  
  Video parameter:
  Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
  Teletext filter in conformity with ETS 300 472 Standard
  
  TV-Scart:
  Output: FBAS,RGB,S-VHS over OSD selectable
  
  DBS-Tuner:
  Frequency Range 950 .. 2150 MHz
  Signal Level - 65 dBm .. - 25 dBm
  Signal-to-Noise Level 12 dB max.
  DBS-Tuner Input Connector F-Type female
  Input Impedance 75 Ohm
  AFC +/- 3 MHz
  Demodulation Shaped QPSK
  Input Symbol rate 2 .. 45 Mbaud/s, SCPC / MCPC
  FEC Viterbi and Reed-Solomon
  Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
  Roll-off Factor 35 %
  Demultiplexing according ISO 13818-1
  
  Ethernet:
  100 MBit compatible, bi-direktional interface
  Function Update of Firmware and Preprogramming
  
  LNB Power and polarisation:
  LNB Current 500mA max. ; short-circuit-proof
  LNB Voltage vertical 11,5V at 400mA
  LNB Voltage horizontal 17,3V at 400mA
  LNB shut-off at Standby-Mode
  
  Count of active satellite position:
  DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
  DiSEqC - Rotor Control
  
  Output digital:
  Output Level 0,5 Vss on 75 Ohm
  Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
  S/PDIF-Output optical (AC3)
  
  Output analog:
  Output Level L/R 0,5 Vss on 600 Ohm
  THD > 60 dB (1 kHz)
  Crosstalk < -65 dB
  
  Serielle Interface RS 232:
  Typ RS232 bidirectional
  Bit rate 115,2 kBit/s max.
  Plug Connector SUB-D-9
  Function Update of Firmware and Preprogramming
  
  Power consumption:
  < 10W / 12V
  
  Input voltage:
  DC12V,alternating acurrent +/- 15%
  
  Extern power supply:
  Input:
  110-240V AC / 50-60Hz / 0,6A
  Output:
  12V = / 1A
  
  Others:
  Ambient Temperature +15°C...+35°C
  Humidity < 80%